IOT Based Power Supply Control from 4 Different Sources using Arduino MEGA

Project Overview:

The main purpose of this project is to provide continuous power supply to a load, by selecting the supply from any of the four sources, they are solar, battery backup, electricity and generator automatically in case if one the source is absent. The necessity of electricity is increasing day by day and the frequent power cuts of electricity are causing many problems in different areas like banks, colleges/schools, hospitals, Houses, and industries. Thus, there is a requirement for an alternate arrangement of power supply. This arrangement can be designed by using embedded system or IOT. When a source, Solar fails the supply automatically shifts to next priority source battery backup, then to electricity and when all the power supply will fail, then shifted to the emergency power source generator. All the power sources are mapped by mobile application and all the process also can be manually controlled by mobile application. The power source availability or capacity will be shown in mobile app as well as in hardware through LED also.

For more detail click on link below


http://www.instructables.com/id/IOT-Based-Power-Supply-Control-From-4-Different-So/

Comments

Post a Comment

Popular posts from this blog

ARDUINO LIBRARY FOR PROTEUS AND HOW WE CAN USE ???

Image
Hello friends, hope you all are fine. In today’s post, I am going to share Arduino Library for Proteus.  I have already posted few other Arduino Libraries on my blog but those were third party Libraries.This is also third party library.Follow the steps then y You can easily use Arduino boards in Proteus and can simulate any kind of project in Proteus. If you got any trouble then you can ask in comments or can use our Ask Question forum to post your questions. This Arduino Library for Proteus contains following boards in it: • Arduino UNO • Arduino Mega 2560 • Arduino Mega 1280 • Arduino Nano • Arduino Mini • Arduino Pro Mini Let’s get started with Arduino Library for Proteus. • First of all, download this Arduino Library for Proteus.The link is given below of this Post.  • When you download it, you will get a zip file. so, unzip this file and you will get two files in it. • These two files are named as ArduinoTEP.LIB and ArduinoTEP.IDX. • Copy
Read more

HOW TO USE USE ULTRASONIC SENSORS IN PROTEUS ?

Image
Hello friends, hope you all are fine. In today’s post, I am going to share an Ultrasonic Sensor Library for Proteus.Using this library you can perform any kind of function with an ultrasonic sensor.                                                                           First of all, let's have a short introduction of an ultrasonic sensor. In the ultrasonic sensor, there are two nodes in which one is transmitter while the other is a receiver. The transmitter sends an ultrasonic wave and this wave strikes to any hindrance present in front of it and then bounces back. This bounced ultrasonic sensor is then captured by the receiver and on the basis of the time taken by this wave to return, the sensor calculates the distance of that obstacle from that sensor. The ultrasonic sensor is usually used for detecting the obstacle in a path and also to find the distance between a sensor and the obstacle. Ultrasonic sensor normally used is HC-SR04, which is also used here in this library.
Read more

ECG Monitoring System by Using Arduino and AD8232

Heart disease was becoming a big disease which health killer people for many years.World Health Organization (WHO) research also shows that the most people were dying due to heart disease. Therefore, This disease can not be taken lightly. Hence, most health care equipment and monitoring system are designed to keep track the disease. As we know that by analyzing or monitoring the ECG signal at the initial stage this disease can be prevented.This project is based on ECG Module (AD8232) and Arduino Mega. For Full Article, Please visit my Instructable Profile. http://www.instructables.com/id/ECG-Monitoring-System-by-Using-Arduino-or-AD8232/
Read more