OLED and Distance Sensor Interfacing With Arduino

This is a very simple project.Only OLED is new in this project OLED is upcoming Technology.That's why I am Sharing this Instructable.
What is an OLED?
OLED (Organic Light Emitting Diodes) is a flat light emitting technology, made by placing a series of organic thin films between two conductors. When electrical current is applied, a bright light is emitted. OLEDs can be used to make displays and lighting. Because OLEDs emit light they do not require a backlight and so are thinner and more efficient than LCD displays(which do require a white backlight).
OLEDs are not just thin and efficient - they can also be made flexible (even rollable) and transparent.

OLED vs LCD OLED displays have the following advantages over LCD displays:
Improved image quality - better contrast, higher brightness, fuller viewing angle, a wider color range and much faster refresh rates.
Lower power consumptionSimpler design that enables ultra-thin, flexible and transparent displays
Better durability - OLEDs are very durable and can operate in a broader temperature range.

For Full Article Click on Link Below

Thank You

Comments

  1. Unknown31 December 2016 at 01:01

    Hi,

    do you already tried with IDE 1.8.0?
    I have some trouble as i only get pixel chaos which resets about every second on my oled.

    ReplyDelete
    Replies
    1. Quaint Quelea2 January 2017 at 19:50

      Sorry,But I haven't tried in New IDE.I ll try to find solution and reply you back.

      Delete

Post a Comment

Popular posts from this blog

HOW TO USE USE ULTRASONIC SENSORS IN PROTEUS ?

Image
Hello friends, hope you all are fine. In today’s post, I am going to share an Ultrasonic Sensor Library for Proteus.Using this library you can perform any kind of function with an ultrasonic sensor.                                                                           First of all, let's have a short introduction of an ultrasonic sensor. In the ultrasonic sensor, there are two nodes in which one is transmitter while the other is a receiver. The transmitter sends an ultrasonic wave and this wave strikes to any hindrance present in front of it and then bounces back. This bounced ultrasonic sensor is then captured by the receiver and on the basis of the time taken by this wave to return, the sensor calculates the distance of that obstacle from that sensor. The ultrasonic sensor is usually used for detecting the obstacle in a path and also to find the distance between a sensor and the obstacle. Ultrasonic sensor normally used is HC-SR04, which is also used here in this library.
Read more

ARDUINO LIBRARY FOR PROTEUS AND HOW WE CAN USE ???

Image
Hello friends, hope you all are fine. In today’s post, I am going to share Arduino Library for Proteus.  I have already posted few other Arduino Libraries on my blog but those were third party Libraries.This is also third party library.Follow the steps then y You can easily use Arduino boards in Proteus and can simulate any kind of project in Proteus. If you got any trouble then you can ask in comments or can use our Ask Question forum to post your questions. This Arduino Library for Proteus contains following boards in it: • Arduino UNO • Arduino Mega 2560 • Arduino Mega 1280 • Arduino Nano • Arduino Mini • Arduino Pro Mini Let’s get started with Arduino Library for Proteus. • First of all, download this Arduino Library for Proteus.The link is given below of this Post.  • When you download it, you will get a zip file. so, unzip this file and you will get two files in it. • These two files are named as ArduinoTEP.LIB and ArduinoTEP.IDX. • Copy
Read more

HOW TO GET HEX FILE FROM ARDUINO ???

Image
HOW TO GET HEX FILE FROM ARDUINO ??? Hello friends, hope you all are fine.Firstly I am wishing you a Happy New Year. In today’s post, I am going to share How to get Hex File from Arduino.If you have worked on PIC Microcontrollers or Atmel etc then you have seen that you always get hex file from their compilers and then you burn that hex file in the respective microcontroller using their programmer or burner. But that’s not the case with Arduino. In Arduino boards, you simply plug it into your computer and you hit Upload button and the code automatically gets upload in Arduino boards. It doesn’t create any hex file.There are many cases when hex file is required. For example, instead of using Arduino board you just want to use the ATmega microcontroller then the easiest way is to write the code in Arduino and then get its hex file and upload it in your microcontroller, which makes the task quite easy. Another example is Proteus simulation, when you want to simulate your Arduino boar
Read more