Sensor Based Automatic Targeting System

Hello Friends,
I am Sharing my next project which based on PIR Sensor and 8051 Microprocessor.

 Sensor Based Automatic Targeting System for Border Area is an automated gun target and firing system if found an object within a range of sensors. The project is primarily based on PIR Sensors, Microcontroller, and a wireless transmitter and receiving units using FSK. The Project is required because till today, the border is protected by Iron Spike wires, and a watch tower containing a person continuously flashing the light over the border area day and night. Those persons are fully responsible for any intrusion.This project will not fully remove the responsibility from their soldiers, but minimize the responsibility and human mistakes on the border. The sensors will sense any living object inside the range, provide the s/g to microcontroller, in response, microcontroller generates the code on the site and send to the watch tower where the receiver receives the code, provides code to microcontroller, interprets the location of the object corresponding to received code, activates targeting system, alarming system, and targeting system.

 For Full  Article Click on Link Below:

 http://www.instructables.com/id/Sensor-Based-Automatic-Targeting-System/ 

Comments

Post a Comment

Popular posts from this blog

HOW TO USE USE ULTRASONIC SENSORS IN PROTEUS ?

Image
Hello friends, hope you all are fine. In today’s post, I am going to share an Ultrasonic Sensor Library for Proteus.Using this library you can perform any kind of function with an ultrasonic sensor.                                                                           First of all, let's have a short introduction of an ultrasonic sensor. In the ultrasonic sensor, there are two nodes in which one is transmitter while the other is a receiver. The transmitter sends an ultrasonic wave and this wave strikes to any hindrance present in front of it and then bounces back. This bounced ultrasonic sensor is then captured by the receiver and on the basis of the time taken by this wave to return, the sensor calculates the distance of that obstacle from that sensor. The ultrasonic sensor is usually used for detecting the obstacle in a path and also to find the distance between a sensor and the obstacle. Ultrasonic sensor normally used is HC-SR04, which is also used here in this library.
Read more

ARDUINO LIBRARY FOR PROTEUS AND HOW WE CAN USE ???

Image
Hello friends, hope you all are fine. In today’s post, I am going to share Arduino Library for Proteus.  I have already posted few other Arduino Libraries on my blog but those were third party Libraries.This is also third party library.Follow the steps then y You can easily use Arduino boards in Proteus and can simulate any kind of project in Proteus. If you got any trouble then you can ask in comments or can use our Ask Question forum to post your questions. This Arduino Library for Proteus contains following boards in it: • Arduino UNO • Arduino Mega 2560 • Arduino Mega 1280 • Arduino Nano • Arduino Mini • Arduino Pro Mini Let’s get started with Arduino Library for Proteus. • First of all, download this Arduino Library for Proteus.The link is given below of this Post.  • When you download it, you will get a zip file. so, unzip this file and you will get two files in it. • These two files are named as ArduinoTEP.LIB and ArduinoTEP.IDX. • Copy
Read more

HOW TO GET HEX FILE FROM ARDUINO ???

Image
HOW TO GET HEX FILE FROM ARDUINO ??? Hello friends, hope you all are fine.Firstly I am wishing you a Happy New Year. In today’s post, I am going to share How to get Hex File from Arduino.If you have worked on PIC Microcontrollers or Atmel etc then you have seen that you always get hex file from their compilers and then you burn that hex file in the respective microcontroller using their programmer or burner. But that’s not the case with Arduino. In Arduino boards, you simply plug it into your computer and you hit Upload button and the code automatically gets upload in Arduino boards. It doesn’t create any hex file.There are many cases when hex file is required. For example, instead of using Arduino board you just want to use the ATmega microcontroller then the easiest way is to write the code in Arduino and then get its hex file and upload it in your microcontroller, which makes the task quite easy. Another example is Proteus simulation, when you want to simulate your Arduino boar
Read more